ED-IPC3020 Series Features
Functions	Parameters
CPU	Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76
RAM	4GB and 8GB LPDDR4X-4267 SDRAM are optional
Storage	Support Micro SD Card and M.2 NVMe SSD storage expansion
Video	Dual 4Kp60 HDMI display output
Audio	Stereo audio input and output with separately 3.5mm audio jack
Interface	1 x Gigabit ethernet port with optional PoE, 2 x USB 3.0, 2 x USB 2.0, 1 x RS232, 1 x RS485 and 1 x Buzzer
Power Input	5V DC power input via USB-C, support ON/OFF power button
Other	Built-in RTC, support SuperCAP and CR1220 battery backup
Operating Temperature	-25°C ~ 60°C
Mechanical	102.8mm(W) x 89.5mm(D) x 32.5mm(H), 300g Fanless design with high-quality metal case and big heatsink, providing excellent cooling performance

Document Download

ED-IPC3020 Datasheet Download

ED-IPC3020 Users Manual Download

ED-IPC3020 Installing OS Download

Optimization for Noise Problem

Fails to boot ED-IPC3020/ED-HMI3020/ED-HMI3010 from SD card-Trouble Shooting

Specifications

System
CPU	Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76
VPU	4Kp60 HEVC decoder
GPU	OpenGL ES 3.1 & Vulkan 1.2
Memory	4GB and 8GB LPDDR4X-4267 SDRAM are optional
Storage	Micro SD Card Slot, supporting to select the 00GB/32GB/64GB SD card M.2 NVMe SSD, supporting to select the 00GB/128GB/256GB SSD

Software
Operating System	- Raspberry Pi OS(Desktop) 32-bit - Raspberry Pi OS(Lite) 32-bit - Raspberry Pi OS(Desktop) 64-bit - Raspberry Pi OS(Lite) 64-bit

Front I/O
Audio OUT	1 x Audio Output(HPO), 3.5mm audio jack connector(green), stereo audio output.
Audio IN	1 x Audio Input(LINE IN), 3.5mm audio jack connector(red), supporting stereo audio input.
RS485	1 x RS485 port, 3-Pin 3.5mm spacing phoenix terminals with 120Ω terminal resistor. The signal is defined as GND/A/B.
RS232	1 x RS232 port, 3-Pin 3.5mm spacing phoenix terminals, the signal is defined as GND/TX/RX.
USB 2.0	2 x USB 2.0 ports, dual layer type A connector, each channel supports up to 480Mbps.
USB 3.0	2 x USB 3.0 ports, dual layer type A connector, each channel supports up to 5Gbps.
1000M Ethernet	1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network. PoE can be supported through expansion module.

Internal I/O
5V 1A	1 x DC OUT, 3-Pin 2.0mm spacing WTB connector, supporting 5V 1A output. These pins are defined as GND/5V/GND, reserving to provide power supply for extended LCD.
Speaker	1 x PA output, 4-Pin 1.5mm spacing WTB connector, dual channel stereo audio output. It can be extended to connect two 4Ω 3W stereo speakers, these pins are defined as R+/R-/L+/L-.
MIPI CSI/DSI	2 x MIPI CSI/DSI ports, 2-Lane CSI/DSI signal. They are reserved for connecting extended LCD screen, supporting I2C touchscreen and backlight adjustment.
M.2 M	1 x M.2 M port, M.2 M Key connector, using to connect SSD and other fast peripherals.  It compatibles with M.2 2230, M.2 2242 and M.2 2260, supporting to boot the OS from SSD.

Expansion Performance
RTC	RTC with SuperCAP and CR1220 battery backup, which can ensure that the system clock is not affected by device power-off.  Note：A CR1220 battery is provided by default in China.
Buzzer	A tip or an abnormity can be configurated according to actual application, which realizes the alarm function.

Electrical Characteristics
Input Voltage	5V DC
Maximum Power Consumption	25W(Max)

Mechanical Characteristics
Dimensions	102.8mm x 89.5mm x 32.5mm (WxDxH)
Weight	300g
Installation	Placing on the desk

Wireless
Wi-Fi	Dual-band 802.11ac Wi-Fi
Bluetooth	Bluetooth 5.0 / Bluetooth Low Energy (BLE)

Environmental & Regulatory
Operating Temperature	-25°C ~ 60°C
Storage Temperature	-25°C ~ 60°C
Ambient Humidity	5% ~ 95% (non-condensing)
Certifications	FCC FCC 47 CFR Part 15 Subpart B CE EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3 EN 55032/EN 55035/ EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52 EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2

System Block Diagram

Dimension Unit:mm

Order Information