2 Installing Components (Optional)

This chapter describes how to install optional components.

2.1 Install Antenna

If the purchased ED-IPC1220 device includes 4G and Wi-Fi functions, you need to install the antennas before using the device.

Preparation:

The corresponding antennas have been obtained from the packing box. If multiple antennas are included, distinguish them by the labels on the antennas.

Steps:

  1. Identify the location of the antenna interfaces on the side of the device, as shown in the marked positions in the figure below.
install-antenna
  1. Align the interfaces on the device and the antenna, and tighten the antenna clockwise until it is secure and will not fall off.

2.2 Install Nano SIM Card

If the purchased ED-IPC1220 device includes the 4G function, you need to install a Nano SIM card before using the 4G function.

NOTE

Please turn off the power before inserting or removing the Nano SIM card.

Preparation:

  • The 4G Nano SIM card to be used has been obtained.
  • The device power is disconnected.

Steps:

  1. Use a Phillips screwdriver to unscrew the 4 screws on the DIN rail bracket counterclockwise, and remove the default DIN rail bracket.
install-1
  1. Identify the location of the Nano SIM card slot on the side of the device, as shown in the marked position in the figure below.
  1. Insert the Nano SIM card with its contact side facing up into the corresponding slot. A click indicates successful installation.
  1. Install the DIN rail bracket back onto the device.