1 Hardware Manual

This chapter introduces the product overview, packing list, appearance, indicator and interface.

1.1 Overview

ED-HMI3010-070C is a 10.1-inch industrial HMI based on Raspberry Pi 5. According to different application scenarios and user needs, different specifications of RAM and SD card computer systems can be selected.

RAM can choose 4GB and 8GB
SD card can choose 32GB and 64GB

ED-HMI3010-070C provides HDMI, USB 2.0, USB 3.0 and Ethernet interfaces, supporting access to the network through Wi-Fi and Ethernet.
ED-HMI3010-070C integrates 10.1-inch LCD touch screen and is mainly used in industrial control and IOT.

1.2 Packing List

1x ED-HMI3010-070C Unit
1 x Mounting Kit (including 4 x buckles, 4xM4*10 screws and 4xM4*16 screws)

1.3 Appearance

Introducing the functions and definitions of interfaces on each panel.

1.3.1 Front Panel

This section introduces functions and definitions of front panel.

NO.	Function Definition
1	1 x LCD display, 7-inch LCD touch screen, which supports up to 1024x600 resolution and multi-point capacitive touchscreen.
2	1 x camera (optional), 8 Megapixel front camera.

1.3.2 Rear Panel

This section introduces interfaces and definitions of rear panel.

NO.	Function Definition
1	4 x installation holes of buckle, which are used to fix the buckles to the device for installation.

1.3.3 Side Panel

This section introduces interfaces and definitions of side panel.

NO.	Function Definition
1	2 x USB 2.0 ports, Type-A connector, each channel supports up to 480Mbps.
2	2 x USB 3.0 ports, Type-A connector, each channel supports up to 5Gbps.
3	1 x Ethernet port (10/100/1000M adaptive), RJ45 connector with led indicator. It can be used to access the network.
4	2 x HDMI ports, micro-HDMI connector, which can connect a display and supports 4K 60Hz.
5	1 x DC input, USB Type-C connector, which supports 5V 5A power input.
6	Heat dissipation holes, which help improve cooling performance.

1.4 Indicator

This section introduces various statuses and meanings of indicators contained in ED-HMI3010-070C.

Indicator	Status	Description
Yellow indicator of Ethernet port	On	The Ethernet connection is in the normal state.
	Blink	The Ethernet connection is abnormal.
	Off	The Ethernet connection is not set up.
Green indicator of Ethernet port	On	The Ethernet connection is in the normal state.
	Blink	Data is being transmitted over the Ethernet port.
	Off	The Ethernet connection is not set up.

1.5 Interface

Introducing the definition and function of each interface in the product.

1.5.1 Power Supply

The ED-HMI3010-070C includes one power input, and the silkscreen is “PWR IN”. The connector is USB Type-C, which supports 5V 5A power input.

TIP

In order for Raspberry Pi 5 to achieve better performance, it is recommended to use a 5V 5A power adapter.

1.5.2 1000M Ethernet

ED-HMI3010-070C includes one adaptive 10/100/1000M Ethernet port, RJ45 connector with indicator, and the silkscreen is “”, which is used to access the network. The pins corresponding to the terminals are defined as follows：

	Pin ID	Pin Name
	1	TX1+
	2	TX1-
	3	TX2+
	4	TX2-
	5	TX3+
	6	TX3-
	7	TX4+
	8	TX4-

NOTE

In order to let Raspberry Pi 5 have better cooling performance, we use a thermal conductive silicone to connect the bottom of Raspberry Pi 5 to the metal case of LCD screen. However, this will cause that the distance between Ethernet port and LCD screen is small, and it is difficult to pull out the network cable by hand after it is inserted into Ethernet port. When you need to pull out the network cable, we recommend using an auxiliary tool (tweezers or screwdriver) to press the buckle on network cable terminal, and then pull out the cable by hand.