10.1-inch Industrial HMI Based on Raspberry Pi CM4
- 10.1" TFT, resolution 1280x800, multi-point capacitive touch screen
- Broadcom BCM2711, quad core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- Up to 8GB LPDDR4 RAM and 32GB eMMC storage
- Lan supports up to 1Gbps
- 2.4GHz and 5GHz dual-band Wi-Fi and Bluetooth
- Support Micro SD Card; integrated RTC, EEPROM and encryption chip
- Wide voltage power input range of DC 9V~28V with reverse polarity protection, overvoltage protection and overcurrent protection
- Embedded installation, compatible with VESA standard bracket installation
|  |
| System |
|---|
| CPU | Broadcom BCM2711, quad core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| VPU | H.265(HEVC), up to 4Kp60 decode
H.264, up to 1080p60 decode, 1080p30 encode |
| GPU | OpenGL ES 3.1 & Vulkan 1.0 |
| Memory | Options for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM |
| Storage | Options for 8GB, 16GB, 32GB eMMC storage
Micro SD card (user storage expansion) |
| Software |
|---|
| Operating System | Raspberry Pi OS (Desktop) 32-bit
Raspberry Pi OS (Lite) 32-bit
Raspberry Pi OS (Desktop) 64-bit
Raspberry Pi OS (Lite) 64-bit |
| Front I/O |
|---|
| Camera | Built-in 8-megapixel front camera (optional) |
| Side I/O |
|---|
| Power | 1 x DC IN, DC Jack connector, supporting 9V~28V input. |
| Audio | 1 x Audio In/Stereo Out, 3.5mm audio jack connector. It can be used as MIC IN and Audio OUT. - When a headphone is connected, the audio output switches to the headphone.
- When no headphone is connected, the audio output switches to the speaker.
|
| 1000M Ethernet | 1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network. |
| SD Card Slot | 1 x Micro SD card slot, using to install SD card for storing user data. |
| HDMI | x HDMI port, type A connector. It is compatible with HDMI 2.0 and supports 4K 60Hz. |
| USB 2.0 | 1 x USB 2.0 port, type A connector, which supports up to 480Mbps transmission rate. |
| USB 3.0 | 2 x USB 3.0 ports, type A connector, which support up to 5Gbps transmission rate. |
| Antenna (optional) | 1 x SMA port, using to connect Wi-Fi/BT antenna. |
| Speaker | 1 x PA output, built-in a 4Ω 3W speaker. |
| Buttons and Indicators |
|---|
| Reset | 1 x Reset button, which can reset the device. |
| PROGRAM | 1 x PROGRAMMING button, which is used to flash to eMMC for the system. |
| PWR | 1 x red power indicator, which is used to check the status of device power-on and power-off. |
| ACT | 1 x green system indicator, which is used to check the working status of device. |
| Expansion Functions |
|---|
| EEPROM | Supports 4K byte storage and improves the ease of use of device. |
| Crypto Authentication | It can be matched to realize the required upper layer application and improves the security of device. |
| RTC | RTC with CR1220 battery backup, which can ensure that the system clock is not affected by device power-off.
Note: A CR1220 battery is provided by default in China. |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizes the alarm function. |
| LCD |
|---|
| LCD Size | 10.1" TFT |
| Resolution | 1280 x 800 |
| Colors | 16.7MB |
| Active Area | 216.576mm(H) x 135.36mm(V) |
| Backlight | LED |
| MTBF | >30000h |
| Luminance | 400cd/m2 |
| Contrast Ratio | 1000:1 |
| Response Time | 30ms |
| Viewing Angle (CR≥10) | 80°(L)/80°(R)/80°(U)/80°(D) |
| Touch Screen |
|---|
| Type | Multi-point Capacitive Touch Screen |
| Transmittance | ≥85％ |
| Connection Method | COF |
| Controller Interface | I2C |
| Driver Support | Linux |
| Multi-touch | 10 points |
| Surface Hardness | 6H |
| Electrical Characteristics |
|---|
| Input Voltage | 9V ~ 28V DC |
| Power Consumption | 20W (Max) |
| Mechanical Characteristics |
|---|
| Dimensions | 258mm x 172mm x 40mm (WxDxH, antenna is not included.) |
| Weight | About 1.1kg |
| Installation | Embedded front installation |
| Wireless |
|---|
| Wi-Fi/Bluetooth (optional) | 2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth with antenna. - 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
- 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac
- The Bluetooth supports 2402MHz ~ 2480MHz frequency
|
| Environmental & Regulatory |
|---|
| Operating Temperature | -25°C ~ 60°C |
| Storage Temperature | -25°C ~ 60°C |
| Ambient Humidity | 5% ~ 95% (non-condensing) |
| Certifications | - FCC
- FCC 47 CFR Part 15 Subpart B
- CE
- EN IEC 62368-1:2020+A11:2020
- EN IEC 62311:2020
- ETSI EN 301 489-1 V2.2.3 (2019-11)/Draft ETSI EN 301 489-17 V3.2.6 (2023-06)
EN 55032:2015 + A1:2020 + A11:2020/EN 55035:2017 + A11:2020
EN IEC 61000-3-2:2019 + A1:2021/EN 61000-3-3:2013 + A1:2019 + A2:2021 - ETSI EN 300 328 V2.2.2 (2019-07)/ETSI EN 301 893 V2.1.1 (2017-05)
|
Unit: mm
You can choose a power adapter according to actual needs.
| Model | Description | Picture |
|---|
| ED-PSU1202-UK | 100~240VAC to12VDC/2A Adapter, with UK AC plug,5.5mm DC plug |  |
| ED-PSU1202-US | 100~240VAC to 12VDC/2A Adapter, with US AC plug,5.5mm DC plug |
| ED-PSU1202-AU | 100~240VAC to 12VDC/2A Adapter, with AU AC plug,5.5mm DC plug |
| ED-PSU1202-EU | 100~240VAC to 12VDC/2A Adapter, with EU AC plug,5.5mm DC plug |
| NOTE: Each model contains only one of the UK, US, AU and EU plugs. |
- 1 x ED-HMI2020-101C Unit
- 1 x Mounting Kit (including 4 x buckles, 4xM4*10 screws and 4xM4*16 screws)
- [Wi-Fi/BT Version - optional] 1 x 2.4GHz/5GHz Wi-Fi/BT Antenna
