IoT Gateway is specially designed for IoT application based on Raspberry Pi Compute Module 1/3/3+.
ED-IOTGATEWAY is based on Raspberry Pi Compute Module, supports CM3+/CM3/CM1 full series solution , specially designed for IoT application, it provides rich wireless communication capability including WiFi, Bluetooth, 4G Module(Optional) & LoRa(Optional), this solution also supports various wired communication capability such as 10/100M Ethernet, USB2.0, UART and RS485. On board 2Kb EEPROM and 32Mb Serial Flash can be used to store the system data and user data.
This system can build an IoT network through WiFi, Bluetooth & LoRa technology, manage all of the nodes through the powerful computing capability of Raspberry Pi Compute Module, and link to the cloud through 10/100M Ethernet or 4G/LTE wireless Module.
CSI interface supports high resolution cameras, DSI interface supports Raspberry Pi official display, the powerful video CODEC capability supports all kinds of multimedia applications.
On board RTC, temperature sensor and low voltage detector circuit will monitor the operating condition of the system, allow the system to store the important user data and system data, and ensure the system operating reliably.
The users can add more functions on the board through Raspberry Pi Standard 40 Pins Connector, Mini PCI-e and 24 Pins DIP connector, and fully utilize its powerful computing & communication capability to satisfy all kinds of requirement in IoT application.
Raspberry Pi Compatibility:
· Raspberry Pi Compute Module 1
· Raspberry Pi Compute Module 3
· Raspberry Pi Compute Module 3 Lite
· Raspberry Pi Compute Module 3+ 8 GB / 16 GB / 32 GB eMMC flash
· Raspberry Pi Compute Module 3+ Lite
Camera & Display:
· 1 x CSI supports the standard CSI cameras
· 1 x HDMI
· 1 x DSI supports Raspberry Pi Official Display
· 1 x 10/100M Ethernet
· 2 x USB2.0
· 1 x USB Slave for system programming
· 3 x UARTs(TTL Signal)
· 1 x RS485 with Lightning Protection
· 1 x WiFi complies with IEEE802.11b/g/n Standard
· 1 x Bluetooth 4.1
· 4G /LTE Module by Mini PCI-e connector (Optional)
· LoRa Concentrator Gateway Module by 24pins DIP connector (Optional)
· 1 x microSD card slot
· On Board 2Kb EEPROM
· On Board 32Mb serial Flash
· On Board RTC
· On Board Low Voltage Detector(LVD)
· 1x high precision temperature sensor
· 1 x Red & 1 x Green LED Indicator
· 1 x System Reset Button
· 1 x Custom User Button
· 1 x Buzzer
· 1 x USB Interface by Mini PCI-e Socket
· 1 x USB Interface by a 4pins DIP connector
· 1 x High Speed SPI by 24pins DIP connector
· 1 x Raspberry Pi Standard 40Pins Connector
· 12~18V DC Input by Phenix Connector
· 160 mm(L) x 120 mm(W) x 20mm(H)
· Raspberry Pi Raspbian OS
1. What is the difference between V1.0 and V1.1?
There are slight difference between V1.0 and V1.1 as below:
- There is an additional installation hole near Wireless module on V1.1
- LED position socket was moved to the board edge
- User LED is connected to GPIO, which can be controlled by software instead of Kernel
Hardware Manual of IoT Gateway 2019-8-20 1,130KB
Software Manual of IoT Gateway 2019-9-19 716KB
Drawing of PCB Board 2021-4-11 100KB
Image based Raspbian Lite
Image based Raspbian Desktop