10.1-inch Industrial HMI Based on Raspberry Pi 5
- 10.1" TFT, resolution 1280x800, multi-point capacitive touch screen
- Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU
- Up to 16GB LPDDR4X RAM
- Support Micro SD Card and M.2 NVMe SSD storage expansion
- 1 x Gigabit ethernet port with optional PoE
- Optional 8-megapixel front camera
- 2 x USB 3.0, 2 x USB 2.0, 1 x RS232, 1 x RS485 and 1 x Buzzer
- Dual 4Kp60 HDMI display output
- Stereo audio input and output with separately 3.5mm audio jack, built-in speaker
- 5V DC power input via USB-C, support ON/OFF power button
- Built-in RTC, support SuperCAP and CR1220 battery backup
- Aluminum CNC + sheet metal case, fanless design, providing excellent cooling performance
|  |
| System |
|---|
| CPU | Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 |
| VPU | 4Kp60 HEVC decoder |
| GPU | OpenGL ES 3.1 & Vulkan 1.2 |
| Memory | 4GB, 8GB and 16GB LPDDR4X-4267 SDRAM are optional |
| Storage | Micro SD Card Slot, supporting to select the 00GB/32GB/64GB SD card
M.2 NVMe SSD, supporting to select the 00GB/128GB/256GB SSD |
| Software |
|---|
| Operating System | Raspberry Pi OS(Desktop) 64-bit
Raspberry Pi OS(Lite) 64-bit |
| Front I/O |
|---|
| Camera | Built-in 8-megapixel front camera(optional) |
| Side I/O |
|---|
| Audio OUT | 1 x Audio Output(HPO), 3.5mm audio jack connector (green), stereo audio output. |
| Audio IN | 1 x Audio Input(LINE IN), 3.5mm audio jack connector (red), supporting stereo audio input. |
| Speaker | 1 x PA output, built-in a 4Ω 3W speaker. |
| RS485 | 1 x RS485 port, 3-Pin 3.5mm pitch phoenix terminals with 120Ω terminal resistor.
The signal is defined as GND/A/B. |
| RS232 | 1 x RS232 port, 3-Pin 3.5mm pitch phoenix terminals, the signal is defined as GND/TX/RX. |
| USB 2.0 | 2 x USB 2.0 ports, dual layer type A connector, each channel supports up to 480Mbps. |
| USB 3.0 | 2 x USB 3.0 ports, dual layer type A connector, each channel supports up to 5Gbps. |
| 1000M Ethernet | 1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network. PoE can be supported through expansion module. |
| SD Card Slot | 1 x Micro SD card slot, which is used to install Micro SD card. It supports booting the OS from Micro SD card. |
| HDMI | 2 x HDMI ports, Micro HDMI connector, supporting 4K 60Hz |
| Power | 1 x power in port, USB Type-C connector, supporting 5V/5A DC power input. |
| Buttons and Indicators |
|---|
| ON/OFF | 1 x power button, which is used to turn on and turn off the device. |
| PWR | 1 x red power indicator, which is used to check the status of device power-on and power-off. |
| ACT | 1 x green system indicator, which is used to check the working status of device. |
| COM1~COM2 | 2 x green UART indicators, which is used to check the communication status of UART port. |
| Internal I/O |
|---|
| M.2 M | 1 x M.2 M port, M.2 M Key connector, using to connect SSD and other fast peripherals.
It compatibles with M.2 2230, M.2 2242 and M.2 2260, supporting to boot the OS from SSD. |
| LCD |
|---|
| LCD Size | 10.1" TFT |
| Resolution | 1280 x 800 |
| Colors | 16.7MB |
| Active Area | 216.576mm(H) x 135.36mm(V) |
| Backlight | LED |
| MTBF | >30000h |
| Pixel Pitch | 250cd/m2 |
| Contrast Ratio | 1000:1 |
| Response Time | 30ms |
| Viewing Angle (CR≥10) | 80°(L)/80°(R)/80°(U)/80°(D) |
| Touch Screen |
|---|
| Type | Multi-point Capacitive Touch Screen |
| Transmittance | ≥85％ |
| Connection Method | COF |
| Controller Interface | I2C |
| Driver Support | Linux |
| Multi-touch | 10 points |
| Surface Hardness | 6H |
| Expansion Functions |
|---|
| RTC | RTC with 1F SuperCAP backup, which can ensure that the system clock is not affected bydevice power-off.
We also provide a battery base, and you can buy a CR1220 batterybackup for RTC. |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizesthe alarm function. |
| Electrical Characteristics |
|---|
| Input Voltage | 5V DC |
| Power Consumption | 25W (Max) |
| Mechanical Characteristics |
|---|
| Dimensions | 258mm x 172mm x 39.6mm (WxDxH) |
| Weight | About 1Kg |
| Installation | Embedded front installation |
| Wireless |
|---|
| Wi-Fi | Dual-band 802.11ac Wi-Fi |
| Bluetooth | Bluetooth 5.0 / Bluetooth Low Energy (BLE) |
| Environmental & Regulatory |
|---|
| Operating Temperature | -20°C ~ 60°C |
| Storage Temperature | -25°C ~ 60°C |
| Ambient humidity | 5% ~ 95% (non-condensing) |
| Certifications | FCC
FCC 47 CFR Part 15 Subpart B
CE
EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2 |
Unit: mm
You can choose a Raspberry Pi Power Adapter according to actual needs.
| Model | Description | Picture |
|---|
| SC1149 | Raspberry Pi 27W USB-C Power Supply White UK |  |
| SC1150 | Raspberry Pi 27W USB-C Power Supply White AU |
| SC1151 | Raspberry Pi 27W USB-C Power Supply White IN |
| SC1152 | Raspberry Pi 27W USB-C Power Supply White EU |
| SC1153 | Raspberry Pi 27W USB-C Power Supply White US |
| SC1154 | Raspberry Pi 27W USB-C Power Supply Black UK |
| SC1155 | Raspberry Pi 27W USB-C Power Supply Black AU |
| SC1156 | Raspberry Pi 27W USB-C Power Supply Black IN |
| SC1157 | Raspberry Pi 27W USB-C Power Supply Black EU |
| SC1158 | Raspberry Pi 27W USB-C Power Supply Black US |
- 1 x ED-HMI3020-101C Unit
- 1 x Mounting Kit (including 4 x buckles, 4 x M4*10 screws and 4 x M4*16 screws)
