4 Remote Login

This chapter introduces how to log in the device remotely.

4.1 Finding Device IP

Finding Device IP

4.2 Connecting To The Device Desktop Through VNC

After the device starts normally, you can choose to remotely connect to the device through VNC to configure or debug it.

Preparation:

  • The RealVNC Viewer tool has been installed on PC.
  • ED-HMI2002-101C has been connected to the network through the router.
  • IP address of ED-HMI2002-101C has been get.
  • The VNC function in the ED-HMI2002-101C system has been turned on, as shown in the following figure.
image-20240722152301534

Steps：

  1. Open RealVNC Viewer and select "New connection…" in the File in the menu bar to open the window for creating a connection, as shown in the following figure.
image-20240722152325508
  1. After entering the IP address of ED-HMI2002-101C, click "OK".
image-20240722152347129
  1. Enter the username and password in the Authentication prompt box that pops up.

TIP

Default username is pi, Default password is raspberry.

image-20240722152358354
  1. Select "OK" to log in and connect to the remote desktop.
image-20240722152457002