Single-Board Computer Based on Raspberry Pi CM0
- 1GHz quad-core 64-bit Arm Cortex-A53 processor
- 512MB SDRAM, 8GB or 16GB eMMC storage available
- 1 x HDMI, 2 x USB 2.0, 1 x 100M Ethernet
- 1 x 4-lane MIPI DSI, 1 x 4-lane MIPI CSI
- Support Raspberry Pi 40-Pin GPIO header
- Optional 2.4GHz Wi-Fi and Bluetooth
- USB Type-C for 5V power input
- Integrated RTC and Watch Dog, CR2032 battery supported for RTC backup power
|  |
| System |
|---|
| CPU | 1GHz quad-core 64-bit Arm Cortex-A53 processor |
| VPU | H.264/MPEG-4 video decoding, 1080p@30fps
H.264 encoding, 1080p@30fps |
| GPU | OpenGL ES 1.1/2.0 graphics processing |
| Memory | 512MB SDRAM |
| Storage | 8GB or 16GB eMMC storage available
Micro SD card slot (When the CM0Lite is used, a Micro SD card can be inserted for system boot)
|
| Software |
|---|
| Operating System | Raspberry Pi OS (Desktop) 64-bit
Raspberry Pi OS (Lite) 64-bit
Raspberry Pi OS (Desktop) 32-bit
Raspberry Pi OS (Lite) 32-bit |
| Panle I/O |
|---|
| RTC Battery Base | 1 x RTC Battery Base, allows for the installation of an RTC battery (CR2032) through this interface. |
| DIP Switch | 1 x DIP switch, supports switching between normal operation mode and flashing mode. - LD (switch positioned toward the RTC battery base): Flashing mode
- RUN (switch positioned toward the reset button): Normal operation mode (default state)
|
| Power | 1 x DC input, USB Type-C connector, supports 5V input. |
| HDMI | 1 x HDMI port, Type-A connector, compliant with HDMI 1.3a standard, supports 1080p resolution at 30Hz. |
| USB 2.0 | 2 x USB 2.0 ports, stacked Type-A connector, each supporting a maximum data transfer rate of 480Mbps. |
| 100M Ethernet | 1 x adaptive 10M/100M ethernet port, RJ45 connector. It can be used to access the network. |
| Micro SD Card Slot | 1 x Micro SD card slot, supports installation of a Micro SD card for system boot.
Note: The Micro SD card slot is only compatible with the CM0Lite. |
| Buttons and Indicators |
|---|
| PWR | 1 x red power indicator, used to display the device's power on/off status. |
| ACT | 1 x green system status indicator, used to monitor the device's operating status. |
| RESET | 1 x reset button, recessed design, pressing the button restarts the device. |
| Expansion I/O |
|---|
| PoE HAT Header | 1 x PoE HAT Header, 2x2-pin 2.54mm pitch header, supports expansion connection for Raspberry Pi PoE HAT module. |
| IPEX-1 Interface | 1 x IPEX-1 interface, supports connection to an external antenna. |
| Raspberry Pi 40-Pin GPIO Header | 1 x Raspberry Pi 40-Pin GPIO Header, 2x20-pin 2.54mm pitch header. Pin definitions include GPIO2-GPIO27, 2x 3V3, 2x 5V, 1x ID_SD and 1x ID_SC, supports connection with Raspberry Pi standard accessories. |
| 4-lane CSI Interface | 1 x 4-lane CSI Interface, 22-pin FPC connector, compatible with Raspberry Pi Camera modules. |
| 4-lane DSI Interface | 1 x 4-lane DSI Interface, 22-pin FPC connector, compatible with Raspberry Pi Touch Display. |
| USB 2.0 Interface | 1 x USB 2.0 interface, 1x5-pin 2.54mm pitch header. Pin definitions: VBUS/USB_DM/USB_DP/GND/NC, supports expansion of USB 2.0 interface. |
| 10-Pin Header | 1 x 10-Pin Header, 2x5-pin 2.54mm pitch header. Pin definitions: 4xGND/RUN_PG/WL_ON/BT_ON/TV_OUT/RUN_PG_BUF/GLOBAL_EN, reserved for future functions. - Short GND (Pin 1) and RUN_PG (Pin 2): Shuts down the ED-CM0NANO
- Short GND (Pin 3) and WL_ON (Pin 4): Disables Wi-Fi functionality
- Short GND (Pin 5) and BT_ON (Pin 6): Disables Bluetooth functionality
- Connect a button between RUN_PG_BUF (Pin 9) and GLOBAL_EN (Pin 10): Can be used to wake the ED-CM0NANO from sleep mode
|
| Expansion Functions |
|---|
| RTC | Integrated RTC function with an RTC battery base, supporting the installation of a CR2032 battery as RTC backup power. |
| Watch Dog | Built-in Watch Dog function, enhancing system reliability. |
| Electrical Characteristics |
|---|
| Input Voltage | 5V DC
Note: A 5V 3A adapter is recommended. |
| Power Consumption | 10W (Max) |
| Mechanical Characteristics |
|---|
| Dimensions | 100mm x 85mm (WxD) |
| Weight | About 52g |
| Wireless |
|---|
| Wi-Fi/Bluetooth (optional) | Supports 2.4GHz Wi-Fi and Bluetooth, with an external FPC antenna. - 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
- Bluetooth 5.0: Compatible frequency band 2402MHz ~ 2480MHz
|
| Environmental & Regulatory |
|---|
| Operating Temperature | -20°C ~ 60°C |
| Storage Temperature | -20°C ~ 60°C |
| Ambient humidity | 5% ~ 95% (non-condensing) |
Unit: mm
| Model | Description | Stocking Level |
|---|
| ED-CM0NANO-10008 | Wi-Fi/BT, 8GB eMMC | Standard Stock |
| ED-CM0NANO-10000 | Wi-Fi/BT, without eMMC (CM0Lite) | Standard Stock |
| ED-CM0NANO-10016 | Wi-Fi/BT, 16GB eMMC | Build-to-Order |
| ED-CM0NANO-00000 | Without Wi-Fi, without eMMC (CM0Lite) | Build-to-Order |
TIP
If you require products with other configurations, please contact our sales team separately.
- 1 x ED-CM0NANO Motherboard
- [Optional Wi-Fi/BT Version] 1 x FPC Wi-Fi/BT antenna
