ED-IPC2500 Feature | |
Functions
|
Parameters
|
CPU
|
Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
|
RAM
|
Options for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM
|
Storage
|
Options for 0GB, 8GB, 16GB, 32GB eMMC storage
Micro SD card (support booting OS)
mSATA SSD (optional)
|
Video
|
1 x HDMI port, type A connector. It compatibles with HDMI2.1 standard and supports 4K 60Hz.
|
Wireless
|
2.4GHz and 5GHz dual-band Wi-Fi, Bluetooth and 5G
|
Interface
|
3 x Gigabit Ethernet ports, 2 x USB 2.0 ports
|
Power Input
|
Wide voltage power input range of DC 9V~36V with reverse polarity protection, overvoltage protection and overcurrent protection
|
Others
|
Integrated supercapacitor(backup power supply, optional) , RTC, Watch Dog, EEPROM and crypto authentication
|
Operating Temperature
|
Wide temperature range of -25℃~60℃ for working environment
|
Mechanical
|
143mm x 100mm x 34mm (WxDxH,antennas are not included.), 750g
High-quality metal case, compatible with desktop installation
|
Document Download
Specifications
System | |
CPU |
Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
|
VPU |
H.265(HEVC), up to 4Kp60 decode
H.264, up to 1080p60 decode, 1080p30 encode
|
GPU | OpenGL ES 3.1 & Vulkan 1.0 |
Memory
|
Options for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM
|
Storage
|
Options for 0GB, 8GB, 16GB, 32GB eMMC storage
Micro SD card (support booting OS)
mSATA SSD (optional)
|
Software
|
|
Operating System
|
- Raspberry Pi OS(Desktop) 32-bit
- Raspberry Pi OS(Lite) 32-bit
- Raspberry Pi OS(Desktop) 64-bit
- Raspberry Pi OS(Lite) 64-bit
|
Front I/O
|
|
Power
|
1 x DC IN, 2-Pin 3.5mm spacing phoenix terminals with screw holes.
It supports 9V~36V input, the signal is defined as VIN+/GND.
|
1000M Ethernet
|
3 x adaptive 10/100/1000M ethernet ports, RJ45 connector. It can be used to access the network.
|
Rear I/O | |
SD Card Slot
|
1 x Micro-SD card slot, which is used to install SD card for booting the OS.
|
SIM Card Slot
|
1 x Nano SIM card slot, which is used to install SIM card for getting 5G signal.
|
Micro USB |
1 x Micro USB port, which supports to flash eMMC for the system.
|
Antenna
|
3 x SMA ports(1 x WiFi/BT antenna port, 2 x 5G antenna ports), which is used to connect 5G antenna and WiFi/BT antenna.
|
Side I/O | |
HDMI |
1 x HDMI port, type A connector. It compatibles with HDMI2.1 standard and
supports 4K 60Hz.
|
USB 2.0 |
2 x USB 2.0 ports, type A connector, which support up to 480Mbps.
|
Antenna
|
2 x SMA ports, which is used to connect 5G antenna.
|
Buttons and Indicators | |
Reset |
1 x Reset button, which can reset the device.
|
PWR |
1 x red power indicator, which is used to check the status of device power-on and power-off.
|
5G |
1 x green 5G indicator, which is used to check the status of 5G signal.
|
ACT |
1 x green system indicator, which is used to check the working status of device.
|
USER |
1 x green user indicator, which is used can customize a status according to actual application.
|
Expansion I/O | |
12V 1A |
3 x DC OUT, 2-Pin 2.0mm spacing WTB connector, supporting 12V 1A output. These pins are defined as GND/12V, reserving to provide power supply for extended LCD.
|
5V 1A |
1 x DC OUT, 3-Pin 2.0mm spacing WTB connector, supporting 12V 1A output. These pins are defined as GND/5V/GND, reserving to provide power supply for extended LCD.
|
40-Pin GPIO |
1 x GPIO, 2x20-Pin 2.54mm pitch header, using to lead out the GPIO ports of CM4.
- These pins are defined as GPIO1~GPIO27/3V3/5V2/GND
- Compatibles with expansion modules, which reserves to connect expansion accessories.
|
10-Pin GPIO |
1 x GPIO Pin Header, 2x5-pin 2.54mm pitch header, using to lead out the expansion GPIO ports. User can customize the function according to actual application, these pins are defined as 8xGPIO/3V3/GND.
|
USB 2.0 |
2 x USB 2.0, 5-pin 1.5mm spacing WTB connector, which can be expanded USB 2.0 ports.
|
mSATA |
1 x mSATA, Mini PCIe connector, which supports to connect mSATA SSD.
|
Expansion Performance | |
EEPROM |
Supports 4K byte storage and improves the ease of use of device.
|
Crypto Authentication
|
It can be matched to realize the required upper layer application and improves the security of device.
|
RTC |
Ensure that the system clock is not affected by device power-off.
Note:A CR1220 battery is provided by default in China.
|
Buzzer |
A tip or an abnormity can be configurated according to actual application, which realizes the alarm function.
|
Watch Dog |
Realize the hardware Watch Dog based on the RTC alarm function to ensure the reliability of device.
|
Electrical Characteristics | |
Input Voltage
|
9V ~ 36V DC |
Power Consumption
|
24W |
Mechanical Characteristics
|
|
Dimensions
|
143mm x 100mm x 34mm (WxDxH, antennas are not included.)
|
Weight
|
750g |
Installation
|
Desktop Mounting
|
Wireless
|
|
Wi-Fi/BT
(optional) |
2.4GHz and 5GHz dual-band Wi-Fi with antenna
- 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
- 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac
Bluetooth 5.0 with antenna, compatible with 2402MHz ~ 2480MHz frequency.
|
5G |
Connect with various 5G module(RM500U-CNV) through the M.2 B Key interface, with 4 antennas.
5G NR: 3GPP Release 15/Release 16 NSA/SA operation, Sub-6 GHz
5G NR NSA: n41/78/79
5G NR SA: n1/28/41/77/78/79
Downlink 4 x 4 MIMO: n1/41/77/78/79
LTE Category: Downlink Cat 12, Uplink Cat 13
LTE-FDD: B1/2/3/5/7/8/20/28
LTE-TDD: B34/38/39/40/41
Downlink 2 x 2 MIMO: B1/2/3/5/7/8/20/28/34/38/39/40/41
WCDMA: B1/2/5/8
|
Environmental & Regulatory | |
Operating Temperature
|
-25°C ~ 60°C |
Storage Temperature
|
-25°C ~ 60°C |
Ambient Humidity
|
5% ~ 95% (non-condensing)
|
Certifications
|
FCC
FCC 47 CFR Part 15 Subpart B
CE
EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035/
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2
|