2 Installing Components

This chapter ​describes the specific operational procedures​ for installing ​antennas and SIM card.

2.1 Installing Antennas

If the ED-IPC3200 device you purchased includes 4G and Wi-Fi capabilities, ​ensure you install the antennas before using the device.

Preparation:

Ensure the corresponding antennas have been retrieved from the packaging box. ​When multiple antennas are included, they should be identified by the labels on each antenna.

Steps:

  1. Locate the ​antenna interfaces on the device side​ as indicated in the diagram below.
install-antenna
  1. Align the corresponding interfaces on both the device and antenna, then ​tighten clockwise​ to ensure a secure connection.

2.2 Installing Nano SIM Card

If the ED-IPC3200 device you purchased includes 4G capability, ​ensure you install the SIM card​ before using the 4G function.

NOTE

Hot-swapping of the SIM card is NOT supported.​

Preparation:

The 4G Nano SIM card​ to be used has been obtained.

Steps:

  1. Using a Phillips screwdriver, ​rotate the three screws​ on the DIN rail bracket ​counterclockwise​ to remove the default bracket.
asim1
  1. Locate the position of the ​Nano SIM card slot on the device side​ as indicated in the diagram below.
asim2
  1. Insert the Nano SIM card ​with its golden contacts facing up​ into the corresponding slot. ​An audible click indicates successful installation.​
asim3
  1. Install the DIN rail bracket securely onto the device.