5G Industrial Computer Based on Raspberry Pi CM4
- Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- Up to 8GB LPDDR4 RAM and 32GB eMMC storage
- Support mSATA SSD storage expansion
- 3 x Gigabit Ethernet ports, 2 x USB 2.0 ports, 1 x HDMI
- Integrated 5G communication module with antenna
- Wide voltage power input range of DC 9V~36V with reverse polarity protection, overvoltage protection and overcurrent protection
- Integrated supercapacitor (backup power supply, optional), RTC, Watchdog, EEPROM and crypto authentication
- Wide temperature range of -20℃~60℃ for working environment
- High-quality metal case
|  |
| System |
|---|
| CPU | Broadcom BCM2711, quad core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| VPU | H.265(HEVC), up to 4Kp60 decode
H.264, up to 1080p60 decode, 1080p30 encode |
| GPU | OpenGL ES 3.1 & Vulkan 1.0 |
| Memory | Options for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM |
| Storage | Options for 8GB, 16GB, 32GB eMMC storage
mSATA SSD (optional) |
| Software |
|---|
| Operating System | Raspberry Pi OS (Desktop) 32-bit
Raspberry Pi OS (Lite) 32-bit
Raspberry Pi OS (Desktop) 64-bit
Raspberry Pi OS (Lite) 64-bit |
| Front I/O |
|---|
| Power | 1 x DC IN, 2-Pin 3.5mm pitch phoenix terminals with screw holes.
It supports 9V~36V input, the signal is defined as VIN+/GND. |
| 1000M Ethernet | 3 x adaptive 10/100/1000M ethernet ports, RJ45 connector. It can be used to access the network. |
| Rear I/O |
|---|
| Micro SD Card Slot | 1 x Micro SD card slot, this interface is non-functional and reserved for future use only. |
| Nano SIM Card Slot | 1 x Nano SIM card slot, which is used to install SIM card for getting 5G signal. |
| Micro USB | 1 x Micro USB port, which supports to flash to eMMC for the system. |
| Side I/O |
|---|
| HDMI | 1 x HDMI, Type-A connector, compatible with HDMI 2.0 standard, supporting 4K resolution at 60Hz. |
| USB 2.0 | 2 x USB 2.0 ports, Type-A connector, each supports up to 480Mbps. |
| Antenna | 4 x SMA ports, which is used to connect 5G antenna. |
| Buttons and Indicators |
|---|
| RESET | 1 x RESET button, which can reset the device. |
| PWR | 1 x red power indicator, using to check the status of device power-on and power-off. |
| 5G | 1 x green 5G indicator, which is used to check the status of 5G signal. |
| ACT | 1 x green system indicator, using to check the working status of device. |
| USER | 1 x green user indicator, user can customize a status according to actual application. |
| Internal I/O |
|---|
| 40-Pin GPIO | 1 x GPIO, 2x20-Pin 2.54mm pitch header, using to lead out the GPIO ports of CM4. |
| mSATA | 1 x mSATA, mini PCIe connector, which supports to connect mSATA SSD. |
| Expansion Functions |
|---|
| EEPROM | Supports 4K byte storage and improves the ease of use of device. |
| Crypto Authentication | It can be matched to realize the required upper layer application and improves the security of device. |
| RTC | RTC with 1F SuperCAP backup, which can ensure that the system clock is not affected by device power-off. We also provide a battery base, and you can buy a CR1220 battery backup for RTC. |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizes the alarm function. |
| Watchdog | Implementing the Watchdog function based on RTC Alarm. |
| Electrical Characteristics |
|---|
| Input Voltage | 9V ~ 36V DC |
| Power Consumption | 24W (Max) |
| Mechanical Characteristics |
|---|
| Dimensions | 142.2mm x 100mm x 37.4mm (WxDxH, DIN-rail bracket and antennas are not included.) |
| Weight | About 850g |
| Installation | DIN rail mounting |
| Wireless |
|---|
| 5G | Connection to the 5G module (RM520N-GL) is realized through an M.2 B Key interface, with 4 antennas included. - 5G NR SA
- n1/n2/n3/n5/n7/n8/n12/n13/n14/n18/n20/n25/n26/n28/n29/n30/
n38/n40/n41/n48/n66/n70/n71/n75/n76/n77/n78/n79 - DL 4 × 4 MIMO: n1/n2/n3/n7/n25/n30/n38/n40/n41/n48/n66/n70/n77/n78/n79
- UL 2 × 2 MIMO: n38/n41/n48/n77/n78/n79
- 5G NR NSA
- n1/n2/n3/n5/n7/n8/n12/n13/n14/n18/n20/n25/n26/n28/n29/n30/
n38/n40/n41/n48/n66/n70/n71/n75/n76/n77/n78/n79 - DL 4 × 4 MIMO: n1/n2/n3/n7/n25/n30/n38/n40/n41/n48/n66/n70/n77/n78/n79
- LTE
- FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/B20/
B25/B26/B28/B29/B30/B32/B66/B71 - TDD: B34/B38/B39/B40/B41/B42/B43/B46(LAA)/B48
- DL 4 × 4 MIMO: B1/B2/B3/B4/B7/B25/B30/B38/B40/B41/B42/B43/B48/B66
- WCDMA: B1/B2/B4/B5/B8/B19
|
| Environmental |
|---|
| Operating Temperature | -25°C ~ 60°C |
| Storage Temperature | -25°C ~ 60°C |
| Ambient humidity | 5% ~ 95% (non-condensing) |
Unit: mm
You can choose a power adapter according to actual needs.
| Model | Description | Picture |
|---|
| ED-PSU1202-UK-3.5PL | 100~240VAC to 12VDC/2A Adapter, with UK AC plug, 3.5mm pitch phoenix plug with lock |  |
| ED-PSU1202-US-3.5PL | 100~240VAC to 12VDC/2A Adapter, with US AC plug, 3.5mm pitch phoenix plug with lock |
| ED-PSU1202-AU-3.5PL | 100~240VAC to 12VDC/2A Adapter, with AU AC plug, 3.5mm pitch phoenix plug with lock |
| ED-PSU1202-EU-3.5PL | 100~240VAC to 12VDC/2A Adapter, with EU AC plug, 3.5mm pitch phoenix plug with lock |
| NOTE: Each model contains only one of the UK, US, AU and EU plugs. |
- 1 x ED-IPC2500 Unit
- 4 x 5G Antennas
