ED-IPC2000 Series
Industrial Computer Based on Raspberry Pi CM4
|  |
Specifications
| System | |
|---|---|
| CPU | Broadcom BCM2711, quad core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| VPU | H.265 (HEVC), up to 4Kp60 decode H.264, up to 1080p60 decode, 1080p30 encode |
| GPU | OpenGL ES 3.1 & Vulkan 1.0 |
| Memory | Options for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM |
| Storage | Options for 8GB, 16GB, 32GB eMMC storage Micro SD card (user storage expansion) |
| Software | |
|---|---|
| Operating System | Raspberry Pi OS (Desktop) 32-bit Raspberry Pi OS (Lite) 32-bit Raspberry Pi OS (Desktop) 64-bit Raspberry Pi OS (Lite) 64-bit |
| Front I/O | |
|---|---|
| Power | 1 x DC IN, DC Jack connector, supporting 9V~28V input. |
| HDMI | x HDMI port, type A connector. It is compatible with HDMI 2.0 and supports 4K 60Hz. |
| Audio | 1 x Audio In/Stereo Out, 3.5mm audio jack connector. It can be used as MIC IN and Audio OUT.
|
| 1000M Ethernet | 1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network. |
| Rear I/O | |
|---|---|
| SD Card Slot | 1 x Micro SD card slot, using to install SD card for storing user data. |
| Side I/O | |
|---|---|
| USB 2.0 | 1 x USB 2.0 port, type A connector, which supports up to 480Mbps transmission rate. |
| USB 3.0 | 2 x USB 3.0 ports, type A connector, which support up to 5Gbps transmission rate. |
| Antenna | 1 x SMA port, using to connect Wi-Fi/BT antenna. |
| Buttons and Indicators | |
|---|---|
| RESET | 1 x Reset button, which can reset the device. |
| PROGRAM | 1 x PROGRAMMING button, which is used to flash to eMMC for the system. |
| PWR | 1 x red power indicator, which is used to check the status of device power-on and power-off. |
| ACT | 1 x green system indicator, which is used to check the working status of device. |
| Expansion Functions | |
|---|---|
| EEPROM | Supports 4K byte storage and improves the ease of use of device. |
| Crypto Authentication | It can be matched to realize the required upper layer application and improves the security of device. |
| RTC | Integrated RTC battery base, users can purchase the CR1220 battery as RTC backup power supply |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizes the alarm function. |
| Electrical Characteristics | |
|---|---|
| Input Voltage | 9V ~ 28V DC |
| Power Consumption | 20W (Max) |
| Mechanical Characteristics | |
|---|---|
| Dimensions | 102.8mm x 80.5mm x 32mm (WxDxH, DIN-rail bracket and antenna are not included.) |
| Weight | About 500g |
| Installation | DIN-rail installation |
| Wireless | |
|---|---|
| Wi-Fi/Bluetooth (optional) | 2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth with antenna.
|
| Environmental & Regulatory | |
|---|---|
| Operating Temperature | -25°C ~ 60°C |
| Storage Temperature | -25°C ~ 60°C |
| Ambient Humidity | 5% ~ 95% (non-condensing) |
| Certifications | FCC FCC 47 CFR Part 15 Subpart B CE EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3 EN 55032/EN 55035 EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52 EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2 |
System Diagram
Dimensions
Unit: mm
Ordering Code
Optional Accessory
You can choose a power adapter according to actual needs.
| Model | Description | Picture |
|---|---|---|
| ED-PSU1202-UK | 100~240VAC to12VDC/2A Adapter, with UK AC plug, 5.5mm DC plug |  |
| ED-PSU1202-US | 100~240VAC to 12VDC/2A Adapter, with US AC plug, 5.5mm DC plug | |
| ED-PSU1202-AU | 100~240VAC to 12VDC/2A Adapter, with AU AC plug, 5.5mm DC plug | |
| ED-PSU1202-EU | 100~240VAC to 12VDC/2A Adapter, with EU AC plug, 5.5mm DC plug | |
| NOTE: Each model contains only one of the UK, US, AU and EU plugs. | ||
Packing List
- 1 x ED-IPC2000 Unit
- [Wi-Fi/BT Version - optional] 1 x 2.4GHz&5GHz Wi-Fi/BT Antenna