Low-cost Industrial Computer based on Raspberry Pi CM0
- 1GHz quad-core 64-bit Arm Cortex-A53 processor
- 512MB SDRAM, options for 8GB/16GB eMMC and 32GB SD card
- 1 x HDMI, 2 x USB 2.0, 1 x 100M Ethernet
- Optional 2.4GHz Wi-Fi and Bluetooth
- USB Type-C for 5V power input
- Integrated RTC and Watch Dog, CR2032 battery supported for RTC backup power
- Pre-installed with thermal paste and a passive cooler to provide effective cooling
- Supports DIN rail mounting
|  |
| System |
|---|
| CPU | 1GHz quad-core 64-bit Arm Cortex-A53 processor |
| VPU | H.264/MPEG-4 video decoding, 1080p@30fps
H.264 encoding, 1080p@30fps |
| GPU | OpenGL ES 1.1/2.0 graphics processing |
| Memory | 512MB SDRAM |
| Storage | 8GB or 16GB eMMC storage available
Optional 32GB Micro SD card (used for system boot when using the CM0Lite module). |
| Software |
|---|
| Operating System | Raspberry Pi OS (Desktop) 64-bit
Raspberry Pi OS (Lite) 64-bit
Raspberry Pi OS (Desktop) 32-bit
Raspberry Pi OS (Lite) 32-bit |
| Front I/O |
|---|
| Power | 1 x DC input, USB Type-C connector, supports 5V input. |
| HDMI | 1 x HDMI port, Type-A connector, compliant with HDMI 1.3a standard, supports 1080p resolution at 30Hz. |
| USB 2.0 | 2 x USB 2.0 ports, stacked Type-A connector, each supporting a maximum data transfer rate of 480Mbps. |
| 100M Ethernet | 1 x adaptive 10M/100M ethernet port, RJ45 connector. It can be used to access the network. |
| Rear I/O |
|---|
| Micro SD Card Slot | 1 x Micro SD card slot, supports installation of a Micro SD card for system boot.
Note: The Micro SD card slot is only compatible with the CM0Lite. |
| Side I/O |
|---|
| Antenna Interface | 1 x Antenna interface, SMA connector, for Wi-Fi/BT antenna |
| RTC Battery Interface | 1 x RTC battery interface, supports installation of CR2032 battery via this interface. |
| DIP Switch | 1 x DIP switch, supports switching between normal operation mode and flashing mode. - LD: Flashing mode
- RUN: Normal operation mode (default state)
|
| Buttons and Indicators |
|---|
| PWR | 1 x red power indicator, used to display the device's power on/off status. |
| ACT | 1 x green system status indicator, used to monitor the device's operating status. |
| Reset | 1 x reset button, recessed design, pressing the button restarts the device. |
| Expansion Functions |
|---|
| RTC | Integrated RTC function with an RTC battery interface, supporting the installation of a CR2032 battery as RTC backup power. |
| Watch Dog | Built-in Watch Dog function, enhancing system reliability. |
| Electrical Characteristics |
|---|
| Input Voltage | 5V DC
Note: A 5V 3A adapter is recommended. |
| Power Consumption | 10W (Max) |
| Mechanical Characteristics |
|---|
| Dimensions | 107.5mm x 94.5mm x 26mm (W x D x H, DIN-rail bracket and antenna are not included) |
| Weight | About 320g |
| Installation | DIN rail mounting |
| Wireless |
|---|
| Wi-Fi/Bluetooth (optional) | Supports 2.4GHz Wi-Fi and Bluetooth, with an external antenna. - 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
- Bluetooth 5.0: Compatible frequency band 2402MHz ~ 2480MHz
|
| Environmental & Regulatory |
|---|
| Operating Temperature | -20°C ~ 60°C |
| Storage Temperature | -20°C ~ 60°C |
| Ambient humidity | 5% ~ 95% (non-condensing) |
Unit: mm
| Model | Description | Stocking Level |
|---|
| ED-IPC1000-10008 | Wi-Fi/BT, 8GB eMMC | Standard Stock |
| ED-IPC1000-10032 | Wi-Fi/BT, 32GB SD Card (CM0Lite) | Standard Stock |
| ED-IPC1000-10016 | Wi-Fi/BT, 16GB eMMC | Build-to-Order |
| ED-IPC1000-00032 | Without Wi-Fi, 32GB Micro SD Card (CM0Lite) | Build-to-Order |
TIP
If you require products with other configurations, please contact our sales team separately.
- 1 x ED-IPC1000 Unit
- [Optional Wi-Fi/BT Version] 1 x 2.4GHz Wi-Fi/BT antenna
