2 Installing Components

This chapter describes how to install optional components.

2.1 Install Antenna

If the selected ED-HMI2630-101C includes 4G and Wi-Fi functions, you will need to install the antenna before using the device.

Preparation:

The corresponding antennas have been obtained from the packaging box. If there are multiple antennas, they can be distinguished by the labels on the antennas.

Steps:

1. Find the location of the antenna connector on the device, as shown in the red box on the figure below.

2. Align the connectors on both sides of the device and antenna, then tighten them clockwise to ensure that they will not fall off.

2.2 Install Micro SD Card

Preparation:

The Micro SD card to be used has been obtained.

Steps:

1. Find the location of the Micro SD card slot on the device, as shown in the red box on the figure below.

2. Insert the Micro SD card with the contact side down into the corresponding card slot, and hear a sound to indicate that the installation is complete.

2.3 Install Nano SIM Card (optional)

If the selected ED-HMI2630-101C includes 4G function, you will need to install a SIM card before using the device.

Preparation:

The 4G Nano SIM card to be used has been obtained.

Steps:

1. Find the location of the Nano SIM card slot on the device, as shown in the red box on the figure below.

2. Insert the Nano SIM card with the contact side down into the corresponding card slot, and hear a sound to indicate that the installation is complete.