2 Installing Device

This chapter introduces how to install the device.

Preparation：

  • Installation brackets and installation screws have been prepared (M4*8 with spacers, M6*10 with spacers)
  • M4 and M6 allen head screwdrivers have been prepared

Steps：

  1. Determine the location of the installation hole on the camera, as shown in the red frame in the figure below. Generally, it can be fixed with a central screw and one peripheral screw.
  1. Place the installation bracket above the camera installation hole, so that the bracket (the side with M4 screw hole) is aligned with the central screw hole of the camera, and use a screwdriver to fix the bracket on the camera with M4 screw with spacer, as shown in the following figure.
  1. Rotate the bracket, adjust the installation direction, and select top installation or side installation as needed. The effect is as shown below:
  1. Use M6 screws to fix the bracket and other devices. It is recommended to use a center screw and one peripheral screw for fixing.

TIP

Adjust the appropriate installation position and angle according to different project requirements on site.