Overview

- ED-GW1302S module is a new generation of LoRaWAN gateway module in mini-PCIe form-factor with SPI interfaces based on Semtech® SX1303 and SX1250. It features extremely low power consumption, outstanding performance with CE, FCC certified.

- ED-GW1302S LoRaWAN gateway module support both US915 and EU868 frequency bands, enable you to have a wide-range of LoRaWAN frequency plans options to choose including EU868, US915, AS923, AS920, AU915, KR920, and IN865.

- ED-GW1302S is designed for M2M and IoT applications and can be widely applied in LPWAN gateway supported scenarios. It would be a perfect choice for you to significantly reduce the technical difficulties and time-consumption when developing the LoRa gateway devices, including LoRaWAN gateway, miner hotspots, etc.

Document Download
Datasheet Download

Block Diagram

Interface Diagram

Pinout

Pinout Interfaces

Power Supply – This module must be supplied through the VCC_3V3 pins by a DC power.

SPI Interfaces – It’s SPI slave side and gives access to the configuration registers of SX1302.

GPS-PPS – This module includes the GPS_PPS input for received packets time-stamped and Fine timestamp.

RESET – It includes the RESET active-high input signal to reset the radio operations as specifiedby the SX1302 Specification.

Antenna RF Interface – The module have one RF interface over a standard UFL connector, The RF port supports both Tx and Rx, providing the antenna interface.