ED-HMI3320-156C
15.6-inch Industrial HMI Based on Raspberry Pi CM5
|  |
Specifications
| System | |
|---|---|
| CPU | Broadcom BCM2712, quad core Cortex-A76 (ARM v8) 64-bit SoC @ 2GHz |
| VPU | H.265 (HEVC), up to 4Kp60 decode |
| GPU | OpenGL ES 3.1 & Vulkan 1.2 |
| Memory | Options for 2GB, 4GB, 8GB, 16GB LPDDR4-4267 SDRAM |
| Storage | Options for 16GB, 32GB, 64GB eMMC storage Micro SD card (user storage expansion) mSATA SSD (optional) |
| software | |
|---|---|
| Operating System | Raspberry Pi OS (Desktop) 32-bit Raspberry Pi OS (Lite) 32-bit Raspberry Pi OS (Desktop) 64-bit Raspberry Pi OS (Lite) 64-bit |
| Side I/O | |
|---|---|
| Power | 1 x DC IN, DC Jack connector, with reverse polarity protection, overvoltage protection andovercurrent protection. It supports 9V~36V input. |
| HDMI | 1 x HDMI port, type A connector, which is compatible with HDMI 2.1 standard andsupports 4K 60Hz. |
| RS232 | 1 x RS232 port, DB9 male connector, using the 2, 3 and 5 pins, the corresponding signal isdefined as RX/TX/GND. |
| RS485*1/232 | 3 x RS485/232 port, DB9 male connector, different numbers of RS232 and RS485 ports canbe selected according to actual application. We use the 1 and 2 pins for RS485 signal, thecorresponding signal is defined as A/B. We use the 2, 3 and 5 pins for RS232 signal, thecorresponding signal is defined as RX/TX/GND.
|
| USB 3.0 | 2 x USB 3.0 ports, type A connector, supporting up to 5Gbps USB 3.0 transmission rate. |
| 1000MEthernet | 1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access thenetwork. PoE can be supported through optional expansion module. The maximum power ofPoE is 60W and it is compatible with IEEE 802.3bt standard. |
| USB 2.0/1000MEthernet | Choose one between 2 x USB 2.0 ports and 1 x 1000M Ethernet port.
|
| MIC IN | 1 x MIC Input, 3.5mm audio jack connector (red), which can connect to microphone. |
| LINE OUT | 1 x Audio Output, 3.5mm audio jack connector (green), stereo audio output. |
| Antenna（optional） | 2 x SMA ports, using to connect 4G antenna and Wi-Fi/BT antennas. |
| Buttons and Indicators | |
|---|---|
| Power Switch | 1 x Power button, including short press and long press operations.
|
| Internal I/O | |
|---|---|
| Speaker | 1 x PA output, built-in a 4Ω 3W stereo speaker. |
| SD Card Slot | 1 x Micro SD card slot, which is used to install SD card for storing user data. |
| SIM Card Slot | 1 x Nano SIM card slot, which is used to install SIM card for getting 4G signal. |
| mSATA*2 | 1 x mSATA port, Mini PCIe connector, which is used to connect mSATA SSD. |
| Expansion Performance | |
|---|---|
| Auto-boot | It supports automatic power-on function by default. |
| EEPROM | It supports 4K byte storage and improves the ease of use of device. |
| Crypto Authentication | It can be matched to realize the required upper layer application and improves the security of device. |
| RTC | Ensure that the system clock is not affected by device power-off. Note: A CR2032 battery is provided by default in China. |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizes the alarm function. |
| LCD | |
|---|---|
| LCD Size | 15.6" TFT |
| Resolution | 1920 x 1080 |
| Screen Ratio | 16:9 |
| Colors | 16.7MB |
| Active Area | 344.16mm(H) x 193.59mm(V) |
| Backlight | E-LED |
| MTBF | 50000h |
| Pixel Pitch | 0.05975mm x 0.17925mm |
| Contrast Ratio | 3000:1 |
| Response Time | 5ms |
| Viewing Angle (CR≥10) | 89°(L)/89°(R)/89°(U)/89°(D) |
| Input Type | LVDS |
| Touch Screen | |
|---|---|
| Type | Multi-point Capacitive Touch Screen |
| Multi-touch | 10 points |
| Transmittance | 85％±5% |
| CommunicationInterface | USB |
| Touches | More than 50 million times |
| Resolution | 4096 x 4096 |
| SurfaceHardness | Not less than 6H |
| Electrical Characteristics | |
|---|---|
| Input Voltage | 9V ~ 36V DC |
| Power Consumption | 60W (Max) |
| Mechanical Characteristics | |
|---|---|
| Dimensions | 417mm x 266.8mm x 56.3mm (WxDxH, mounting base and antenna are not included.) |
| Weight | 4.05Kg |
| Installation | Wall mounting and desktop mounting |
| Wireless | |
|---|---|
| Wi-Fi/Bluetooth (optional) | 2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth with antenna.
|
| 4G (optional) | Connect with various 4G LTE modules through the Mini PCIe interface, with antenna.
|
| Environmental & Regulatory | |
|---|---|
| Operating Temperature | 0°C ~ 50°C |
| Storage Temperature | -25°C ~ 60°C |
| Ambient humidity | 5% ~ 95% (non-condensing) |
| Certifications | FCC FCC 47 CFR Part 15 Subpart B CE EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3 EN 55032/EN 55035 EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52 EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2 |
System Diagram
Known Issues
- *1. The RS485 function is not available at present. If you need to use RS485, we can manually modify it for you.
- *2. The read rate of some mSATA SSDs is slow.
Dimensions
Unit: mm
Desktop Mounting Base (Optional) 
Ordering Code
Packing List
- 1 x ED-HMI3320-156C Unit
- [Optional] 1 x ED-ACC-DMB2320 (Desktop Mounting Base, including 6xM4 screws)
- [Wi-Fi/BT Version - Optional] 1 x 2.4GHz/5GHz Wi-Fi/BT Antenna
- [4G Version - Optional] 1 x 4G/LTE Antenna