Industrial Smart Camera Based on Raspberry Pi CM5
- Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- Up to 8GB LPDDR4 RAM and 32GB eMMC storage
- High-resolution image sensor with 12 megapixels and up to 70 FPS sampling rate for ultra-fast image acquisition
- Optional liquid module zoom for automatic zooming
- Intergrated modular light source design, each group of light source can be controlled independently
- 3 colors are optional for light sources
- Support brightfield and darkfield modes for optimal lighting on normal, etched, high-gloss or textured surfaces
- High-quality industrial blue aluminum alloy case, supporting bracket mounting
|  |
| System |
|---|
| CPU | Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| VPU | H.265 (HEVC), up to 4Kp60 decode
H.264, up to 1080p60 decode, 1080p30 encode |
| GPU | OpenGL ES 3.1 & Vulkan 1.0 |
| Memory | Options for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM |
| Storage | Options for 8GB, 16GB, Storage 32GB eMMC storage |
| Software |
|---|
| Operating System | Raspberry Pi OS 64-bit |
| Communication Protocol | Ethernet/IP, Modbus TCP, TCP/IP and MC |
| Panel I/O |
|---|
| Power & IO (12-Pin) | 1 x Power & IO port, 12-Pin aviation connector, which is used to connect the power & IO cable (12-Pin M12 connector to bare wire) to access external signals. The signals include power supply, RS232, DI and DO. - 1 x DC IN: 2-Pin, it supports 10V~30V input and the signal is defined as DC-/DC+.
- 1 x RS232: 3-Pin, the signal is defined as TX/RX/GND.
- 1 x DI: 2-Pin, the signal is defined as DI/COMMON.
- 2 x DO: 3-Pin, the signal is defined as DO1/DO2/COMMON
- 1 x Trigger: External trigger signal
- 1 x External Strobe: Control signal of screen flicker
|
| Communication (8-Pin) | 1 x Communication port, 8-Pin aviation connector, which is used to connect the ethernet cable (8-Pin M12 connector to RJ45 connector) to enable camera to access the network. |
| Light Source and Lens |
|---|
| Light Source | 4 areas for LED light source, each eara of light source supports independent configuration.
Light source colors are optional in red, blue and white. |
| Lens | M12 Fixed Lens and M12 Fixed Lens with Liquid Module Zoom are optional. |
| Buttons and Indicators |
|---|
| TUNE | 1 x Adjusting button, one-click button for Auto Focus |
| TRIG | 1 x Trigger button, one-click button for camera trigger |
| Power indicator | 1 x Power indicator, which is used to check the status of camera power-on and power-off. |
| Fault indicator | 1 x Fault indicator, which is used to check the fault status of camera. |
| Working status indicator | 1 x Working status indicator, which is used to check the working status of camera. |
| Network indicator | 2 x Network indicators, which is used to view the status of network connection and data communications. |
| Performance Characteristics |
|---|
| Image Sensor | 12 million pixels |
| Sampling Rate | Up to 70 FPS |
| Aiming Point | Red cross laser |
| Polarizer | Half polarizer and full polarizer are optional. |
| Electrical Characteristics |
|---|
| Input Voltage | 24V ~ 30V DC |
| Power Consumption | 36W (Max) |
| Mechanical Characteristics |
|---|
| Dimensions | 85mm x 60mm x 45mm |
| Weight | 150g |
| Installation | Bracket mounting(the bracket is optional) |
| Environmental & Regulatory |
|---|
| Operating Temperature | 0°C ~ 45°C |
| Storage Temperature | -4°C ~ 60°C |
| Ambient humidity | 5% ~ 90% (non-condensing) |
| Protection degree | IP65 |
| Shock resistance | EN 60068-2-27, 30 g; 11ms; 3 impacts per axial direction |
| Vibration resistance | EN 60068-2-6, 14 mm @ 2 ~ 10 Hz, 1.5mm @ 13 ~ 55 Hz
2 g @ 70 ~ 500 Hz, 2-way 2 hours per axial direction |
| Certifications | - FCC
- FCC 47 CFR Part 15 Subpart B
- CE
- EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
- EN 55032/EN 55035
- EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
- EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2
|
Unit: mm
Optional cables and mounting accessories are available.
| Ordering Code | Description | Picture |
|---|
| ED-ACC-AIC-ETH-A-03 | 3m ethernet cable of 8-Pin M12 male connector to RJ45 connector |  |
| ED-ACC-AIC-ETH-A-05 | 5m ethernet cable of 8-Pin M12 male connector to RJ45 connector |
| ED-ACC-AIC-ETH-A-10 | 10m ethernet cable of 8-Pin M12 male connector to RJ45 connector |
| ED-ACC-AIC-ETH-A-15 | 15m ethernet cable of 8-Pin M12 male connector to RJ45 connector |
| ED-ACC-AIC-PWR-A-03 | 3m power&IO cable of 8-Pin M12 female connector to bare wire |  |
| ED-ACC-AIC-PWR-A-05 | 5m power&IO cable of 8-Pin M12 female connector to bare wire |
| ED-ACC-AIC-PWR-A-10 | 10m power&IO cable of 8-Pin M12 female connector to bare wire |
| ED-ACC-AIC-PWR-A-15 | 15m power&IO cable of 8-Pin M12 female connector to bare wire |
| ED-ACC-AIC-POL-001 | Half polarizer |  |
| ED-ACC-AIC-POL-002 | Full polarizer |
| ED-ACC-AIC-DW-FIX001 | Bracket for fixing between product and profile |  |
| ED-ACC-AIC-DW-FIX002 | 1 x Screw M4*8 + 3 x washers
1 x Screw M6*10 + 1 x T-type nut |
